NAD - C375BEE Stereo Integrated Amplifier

NAD - C375BEE Stereo Integrated Amplifier

£1,025.00
The C375BEE is far more than a bigger C355BEE, in fact, it is much closer in spec to the M3 Integrated Amplifier from NAD’s high end Masters Series. It also incorporates an updated version of NAD’s “Building Block” concept to make the addition of the PP375 phono module and other affordable future upgrades possible. Attention to the most minute detail is evident everywhere, from the heavy gauge steel chassis to the sophisticated power supplies and copper buss bars channeling almost absurd amounts of current to the custom gold plated speaker binding posts.
 
The C375BEE boasts many upgrades and refinements taken directly from the highly acclaimed NAD Masters Series M3 Amplifier. These include application of Bjorn Erik Edvardsen’s innovative and patented Distortion Canceling Circuit in the output stage and BEE Clamp in the power supply. An improved tone control circuit and revised PCB layout has reduced distortion and noise to unprecedented levels. Taken together, these improvements mark a sharp upturn in performance that simply must be heard, to be fully appreciated!
 
This unit is available in Graphite Grey and Titanium
 

 
Line Level Inputs (CD, Video, Tuner, Tape1, Tape2, Aux)
Input impedance (R and C): 100 kΩ+ 320 pF
Input sensitivity ref. 0.5V: 158 mV (ref. 500 mV out)
Signal/Noise ratio, A weighted ref 0.5V: >102 dB (A-weighted, ref. 500 mV)
Frequency response (-3dB 3Hz - 70kHz): ± 0.1 dB (ref. 20 Hz - 20 kHz, Tone defeat ON)
Voltage gain (max volume): 29 dB
 
Controls (Volume Setting @ 12:00 position)  
Treble: ± 5 dB at 10 kHz
Bass: ± 8 dB at 100 Hz
 
Bridged (Monophonic) Mode
Continuous average power output into 8ohms: >330 W
IHF dynamic power - 8 ohms: 800 W
                                       4 ohms: 1200 W
 
Physical Specification
Dimensions (W×H×D): 435 x 133 x 352 mm
Gross Dimensions (W×H×D): 435 x 150 x 396 mm
Net Weight: 15.3 kg
Shipping Weight: 18.0 kg
+
-
© Thame AV 2011 - Site By Weaving Webs